First, UV aging chamber Technical specifications: 1, temperature range: RT 10 ℃ ~ 70 ℃ 2, relative humidity range: ≥95% RH 3, the temperature fluctuation: ≤ ± 0.5 ℃ 4, the temperature uniformity: ≤ ± 2 ℃ 5, humidity fluctuation: ≤ ± 2% 6, humidity uniformity: ≤ ± 2% 7, black panel temperature: 40 ℃ ~ 65 ℃ 8, the distance between the lamp: 35mm 9, sample and lamp distance: 50mm 10, light tube power: 40W 11, ultraviolet wavelength: 290nm ~ 400nm 12, analog condensation: 13 condensation system time is adjustable, UV exposure, simulation condensation time: 1 to 9999 hours and 14 support the model: 150 × 75 (mm ) 15, model number: approximately 40 16, test time: 1 ~ 9999S, M, H adjustable 17, irradiance range: <50W / m 18, Power requirements: AC380 (± 10%) V / 50HZ three-phase five lines Usage: UV aging chamber using fluorescent UV lamp as the light source, by simulating natural sunlight in the UV radiation and condensation, the material accelerated weathering test, in order to obtain material weathering results. The machine is used for the abundance of non-metallic materials, organic materials (such as: paint, paint, rubber, plastic and its products) by testing products and materials related to the degree of aging changes in the sun, humidity, temperature, condensation and other weather conditions, in a short time change, fade and so on. Model: the internal dimension: D × W × H 450 × 1170 × 500: mm Dimensions: D × W × H 580 × 1280 × 1350: mm Second, cabinet making materials: 1, shell material: A3 steel spray treatment; 2, liner material: SUS stainless steel plate imports; 3, cover material: A3 steel spray treatment; 4, the installation of eight UV Series UV lamps on both sides of the studio; 5, the interior heating tank heating, heating up fast, uniform temperature distribution; 6, bidirectional clamshell lid opening and closing ease; 7, automatic water tank level; 8, the sample holder from the pad and stretching springs, are made of aluminum alloy steel; 9, the bottom of the chamber can be fixed with high quality PU wheels; 10, using the back of the scroll type drainage system and U-type plot sinks drainage; 11, the surface of the sample and the UV lamp distance of 50 mm and a plane parallel to ; 12, with automatic lamp replacement alarm; three heating systems: 1, using U-shaped titanium alloy high-speed heating heating tube 2, the temperature control output by the microcomputer calculus, to achieve high precision and high efficiency power efficiency 3, with anti-temperature heating system features four black panel temperature control: 1, with a black aluminum coupling temperature sensor 2, using a black panel temperature instrument control heating, the temperature is more stable five, circuit control system: 1, intelligent ZN4-14S series Korea Autonics temperature controller, control accuracy ± 0.1 ℃ 2, thin film KEY BOARD 3, with power and memory function, the testing process can continue when the remaining restoration 4, the temperature are controlled by PID + S.SR, systems with channel coordination and control, improve the stability of the device and interface control and the use of life 5, Touch setting, and direct digital display 6, with PID automatic calculation function, can reduce the inconvenience caused when artificially set 7, light and condensation, spray can be independently controlled to be 8 cycles in control, individually controlled time and alternating light and condensation cycle time can be controlled 9, in operation or setting, such as an error occurs within one thousand hours in any setting, Motion No. 10 will provide a warning, non-Philips rectifier and starter (assurance can be lit each time you turn the UV lamp) VI light: 1, 8 UV light source with a power rating of 40W series of imported US Q-panel UV fluorescent tubes as a light source, distributed on both sides of the machine, each side 4; 2, UVB-313.UVA-340.UVC-365 light source for users to choose the configuration; (Choose one) 3, UVB- 313 lamp emission spectrum energy is concentrated in the vicinity of the wavelength 313m; 4, the emission spectrum UVA-340 lamp energy concentrated in the vicinity of 340nm wavelength; 5, the emission spectrum of the energy UVC-365 lamps mainly in the vicinity of 365nm wavelength; 6, since the fluorescent light energy output will gradually decay over time, in order to reduce the impact caused by light attenuation tests, so this chamber every quarter fluorescent life in all eight lamps, and by a Supporting a new lamp replace the old lamp, so that the ultraviolet light source is always the new and old lamp composition, resulting in a constant output of light energy; 7, imported US Q-panel lamps in 1800 to 2000 hours; Seven, spray control: 1, spray uniformity Adjustment: Using the manual control function of the controller observed the situation in the open state spray, which is regulated or replace the nozzle. 2, spray status monitoring: machine equipped with sprinklers, extreme changes in temperature and rainfall spray device simulation erosion when it rains, there are a number of nozzles, spray evenly. When spraying, spraying long, freely set by the client. 3, the user need the pressure of deionized water. 4. Drainage: on the floor near the host needs to have drains. 5, the working area: 234 × 353cm (including staff work space) Eight security guards: 1, Protection lock: If the lamp in the light, once the cabinet door is opened, the machine will automatically cut off the power supply tube, and automatically into balance cooling, so as not to harm the human body, in line with IEC 047-5-1 security locks security requirements. 2, the inside temperature over-temperature protection: When the inside temperature exceeds 93 ℃ ± 10%, the machine will automatically cut off the power supply and the heater tube and into balance cooling. 3, sink low water level alarm, prevent the heater air burning. (The above is the leakage, short circuit, over-temperature, water shortages, over-current protection) Nine, equipment conditions: 1, ambient temperature: 5 ℃ ~ + 28 ℃ (within 24 hours the average temperature ≤28 ℃); 2, humidity: ≤85%; 3, machine placed around, things can not be placed each 80 cm; ten, standard: GB / T14522-93, GB / T16422.3-1997, GB / T16585-96 UV aging tests and other existing standards; free delivery cargo door after the end of the installation and commissioning of the equipment, the user's premises to the relevant technical staff free to do the appropriate basic operation training, unlimited number. Dongguan Ding Yao Machinery Co., Ltd. Contact: Han smiled Tel: 15917666653 landline: 0769-82859300 Fax: 0769-82685400 E-mail: 351501777@qq.com